Introduction to gutter
The gutter refers to the concave part between the two spans of the roof of a building. It is set along the outer wall of the building, lower than the roof slope, exposing the exposed groove, collecting rainwater in an organized manner, and leading it to the ground through vertical pipes to form a set of water drainage system. To put it more directly, it refers to the grooves used for roof drainage.
It is to prevent rainwater from flowing down naturally. Over time, not only will there be traces of water flowing down the wall, but water may also seep into the room, causing the wall to mold and corrode. Therefore, gutters should be used for organized drainage. After collecting rainwater, it is finally diverted to the drain pipe through the downspout.
Gutters are divided into integrated gutters and welded gutters in terms of production technology. Common metal materials are color plates, aluminum alloys, stainless steel, galvanized, etc. Different thicknesses can be made according to different materials. For example, the thickness of stainless steel is 0.3mm~3.0mm, but the thickness of galvanized can be 5.0mm.
Kexinda's workshop just finished producing 0.8mm thick galvanized gutters a few days ago, and started producing 5.0mm thick galvanized integrated gutters in the past few days.
When choosing gutters, most people still choose one-piece gutters because they value the quality of the gutters the most. When choosing welded gutters, you should choose a manufacturer with good welding technology. Most people still choose one-piece gutters because welding gutters, if the welding technology is not good enough, will lead to problems such as water leakage in the weld in the later stage. Therefore, when choosing welded gutters, you should choose a manufacturer with good welding technology.
